Home: Applications: Micro Hole Drilling

The new Alase Technologies, Inc. UltraScribe 10-Watt CO2 Laser marking system offers a complete solution for marking on plastics, wood, packaging, glass and semi-conductor components.

Clearly marks barcodes, alphanumeric text, serialization, and graphics. Systems offer easy integration, compact packaging, built in power supply and controls, and intuitive WinLase Software.

More News

Micro Hole Drilling

For this application process, use this solution:

UltraScribe CO2

High-volume manufacturers of polyethylene, polyester, polypropylene, Nylon™, vinyl, PTFE and other plastic films, sheets and tubes now can use Alase Technologies' laser drilling systems for in-line or off-line microhole perforation of their products.

Typical hole size is 0.100mm (0.004"), although this can be varied depending on the application.
A complete 40-hole array pattern can be drilled in as little as 1/3 of a second (depending on material).
Patterns can be lines or areas.
Minimum hole spacing is 0.200mm (0.008") center-to-center.
Pattern area ranges up to 0.5 meter x 0.5 meter.
Material thickness range is from 0.001" to 0.040

Please contact us if you have a need for micro-hole drilling.

Decorative Marking

Metal Marking

Coding & Identification

Medical Device Marking


	Copyright©2004 \| All Rights Reserved \| Alase Technologies, Inc. \| Corporate \| Contact Us \| Home \| 978-433-3000